Exfo FLS-5800 CD/PMD Analyzer Source Uživatelský manuál stáhnout pdf (Strana 30)

Controlling the Source Remotely

24 FLS-5834A

Setting the GPIB Address

If GPIB is selected as the remote command mode, you can select the GPIB

address you want to use from 1 to 30 (default value is 12).

To set a GPIB address:

1. Press the Setup key.

2. Use the up/down or left/right arrow keys to select GPIB Addr. The

current GPIB address is displayed.

Note: If you are in RS-232 mode, the GPIB address cell will display N.A. You must

change the communication mode to GPIB before setting an address.

3. Press ENTER, then use the up/down arrow keys to select a GPIB

address between 1 and 30.

4. Press ENTER to confirm your choice.

Refresh Rate

Backlight

Contrast

Video Mode

Exit

8 Hz

STD

RS232 / GPIB

GPIB Addr.

Baud Rate

Flow Ctrl

GPIB

N.A.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 97 98

Žádné komentáře

Exfo FLS-5800 CD/PMD Analyzer Source Uživatelský manuál Strana 30